Yanmar 1GM10 Spezifikationen PDF herunterladen (Seite 39)

BEFORE YOU OPERATE

GM Series Operation Manual 33

12/05

CRANKING THE ENGINE

MANUALLY

NOTICE

When performing engine break-in or if the

engine has not been used for a long period

of time, engine oil will not be distributed to

all the operating parts. Using the engine in

this condition will lead to seizure.

After a long period of non-use, distribute

engine oil to each part by cranking the

engine. Perform the following procedure

before beginning operation:

1. Open the seacock.

2. Open the fuel cock.

3. Put the remote control shift lever in the

NEUTRAL position.

4. Raise the decompression lever

(Figure 7, (3)) up.

Figure 5

Figure 7

1 – RUN Position

2 – Decompression Position

3 – Decompression Lever

5. Slide the starter handle (Figure 8, (1))

on the starter shaft (Figure 8, (1)),

align the groove and pin, and turn the

engine over about 10 times.

Figure 6

Figure 8

1–Starter Shaft

2 – Starter Handle

6. Listen for any abnormal noises while

cranking the engine.

7. Remove the starter handle.

8. Place the decompression lever in the

RUN position.

(3)

(2)

(1)

0005838

(1)

(2)

0005888

GM_OM.book 33 ページ２０１３年６月１０日　月曜日　午後２時２６分

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 93 94

Kommentare zu diesen Handbüchern

Keine Kommentare

Yanmar 1GM10 Spezifikationen Seite 39

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motor Yanmar 1GM10