Yanmar 4JH3-TCE Spezifikationen PDF herunterladen (Seite 19)

6. Periodic Inspections and Maintenance

19

EN

6.1 Lubricating oil system

6.1.1 SD20

(1) Check the oil level before every op-

eration.

(2) Change the oil after the first 50

hours of operation or after long

storage and every 100 hours of op-

eration thereafter. Lube oil should

be changed while the engine is still

warm.

Change oil in the following manner:

(1) Put the boat hull on a block.

Drain the oil by removing the lower

gear case drain plug, and the upper

gear case oil dipstick.

Let the drive unit cool at least 5 minutes

after operation before removing the oil

drain plug. Hot oil could spurt out

forcefully if the drain plug is removed

from the drive unit immediately after

operation.

WARNING

SD20

A Dipstick

B Upper gear case

C Lower gear case

D Lube oil drain plug

A

B

C

D

003440-00E

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 32 33

Kommentare zu diesen Handbüchern

Keine Kommentare