Yanmar 6LPA-STZP2 Spezifikationen PDF herunterladen (Seite 37)

BEFORE YOU OPERATE

6LPA Series Operation Manual 31

12/05

Figure 5

Handling Engine Oil

1. When handling and storing engine oil,

be careful not to allow dust and water to

contaminate the oil. Clean around the

filler port before filling.

2. Do not mix oils of different types or

brands. Mixing may cause the chemical

characteristics of the oil to change and

lubricating performance to decrease,

reducing the engine’s life.

3. Engine oil should be replaced at the

specified intervals, regardless if the

engine has been operated.

Engine Oil Viscosity

SAE 10W30 or SAE 15W40 are the

recommended oil viscosities.

NOTICE

If you intend to operate your equipment at

temperatures outside the limits shown, you

must consult your authorized Yanmar

Marine dealer or distributor for special

lubricants or starting aids.

Checking the Engine Oil

Figure 5

Figure 6

1. Make sure the engine is level.

2. Remove dipstick (Figure 6, (2)) and

wipe with clean cloth.

3. Fully reinsert dipstick.

4. Remove dipstick. The oil level should

be between upper (Figure 6, (2)) and

lower (Figure 6, (3)) lines on the

dipstick.

5. Add oil if necessary. See Adding

Engine Oil on page 31.

6. Fully reinsert dipstick.

Adding Engine Oil

1. Remove theoil filler port cap from filler

port (Figure 6, (5)) and fill with engine

oil.

NOTICE

Prevent dirt and debris from

contaminating engine oil. Carefully

clean the dipstick and the surrounding

area before you remove the cap.

2. Fill with engine oil to the upper limit

(Figure 6, (2)) on the dipstick

(Figure 6, (1)).

(5)

(1)

(4)

(2)

(3)

0004902

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 105 106

Kommentare zu diesen Handbüchern

Keine Kommentare