Yanmar 1GM10C Spezifikationen PDF herunterladen (Seite 13)

PRODUCT OVERVIEW

OVERVIEW

Owner / Operator

Responsibilities

The operator must, and assumes all

responsibility to:

• Read and understand the operation

manual prior to operating the sail-drive;

• Perform all safety checks as necessary to

ensure safe operation;

• Comply with and follow all lubrication and

maintenance instructions and

recommendations; and

• Have an authorized Yanmar dealer /

distributor perform periodic checkups.

Conducting normal maintenance service

and replacing consumable parts as

necessary is the responsibility of the owner /

operator and necessary to provide the best

durability, performance and dependability of

the Sail-Drive while keeping your overall

operating expenses to a minimum.

Individual operating habits and usage may

increase the frequency of performing

maintenance service condition. Monitor

conditions frequently to determine if the

maintenance intervals suggested in the

manual are frequent enough for your Sail-

Drive.

New Sail-Drive Break-In:

• On the initial engine start-up, allow the

engine to idle for approximately 15

minutes while you check for proper Sail-

Drive function and Sail-Drive oil leaks.

• During the break-in period, carefully

observe Sail-Drive seal indicators for

proper Sail-Drive function.

• During the break-in period, check the Sail-

Drive oil levels frequently.

Dealer / Distributor

Responsibilities

In general, a dealer's responsibilities to the

customer include predelivery inspection

and preparation such as:

• Ensure that the vessel is properly

equipped.

• Prior to delivery, make certain that the

Yanmar Sail-Drive and other equipment

are in proper operating condition.

• Make all necessary adjustments for

maximum efficiency.

• Familiarize the customer with the on-board

equipment.

• Explain and demonstrate the operation of

the Sail-Drive and vessel.

SD Operation Manual 9

© 2009 Yanmar Marine International

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 85 86

Kommentare zu diesen Handbüchern

Keine Kommentare