Yanmar 1GM10C Spezifikationen PDF herunterladen (Seite 52)

Every 100 Hours of Operation

Perform the following maintenance every

100 hours of operation.

• Changing the Lubricating Oil (SD20)

• Inspecting and Replacing the Anode

Changing the Lubricating Oil (SD20)

See Draining and Replacing Lubricating Oil

- SD20 on page 39.

Inspecting and Replacing the Anode

To prevent corrosion of the Sail-Drive body

by sea or lake water, replace the anode

every 100 hours of operation, once every six

months or when it has reduced to half of the

original volume (size).

NOTICE: The anode of the Sail-Drive is only

calculated for the Sail-Drive. Changing the

material of the propeller may require

additional anodes to be installed on the sail-

drive.

SD20

while the boat

in the water

ANODE

1

9

6

4

2

0

-

0

2

4

4

1

(1)

(3)

(2)

(4)

(5)

019416-01X

Figure 15

1 – Safety Label

2 – Anode

3 – Anode

4 – Upper Gear Case

5 – Lower Gear Case

SD50/SD50–4T

(1)

(2)

0005463

Figure 16

1 – Lower Gear Case

2 – Anode

An anode is provided on the lower gear

case. To inspect and replace the anode on

the lower gear case, the vessel must be

removed from the water.

Note: An optional two-part anode is

available from Yanmar for the lower gear

case. This option may allow the anode in the

lower gear case to be changed without

removing the vessel from the water, or by an

underwater diver.

Optional Two-Part Anode Information

Part Number Description Qty.

196440-02660 anode 2

196440-02690 mounting

plate

2

196440-02700 flat head bolt 4

26453-080202 8 X 20 bolt 2

PERIODIC MAINTENANCE

48 SD Operation Manual

© 2009 Yanmar Marine International

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 85 86

Kommentare zu diesen Handbüchern

Keine Kommentare