Yanmar 1GM10V Spezifikationen PDF herunterladen (Seite 13)

2. Product explanation

2.4 Major Servicing Parts

Name of part Function

Decompression lever Opens the exhaust valve and releases the pressure for manual starting.

Fuel filter Removes dust and water from fuel. Drain the filter periodically. The internal

element (filter) should be changed periodically.

Fuel feed pump,

Priming lever

Feed fuel to the fuel injection pump. Moving the priming lever up and down

feeds the fuel. When there is no fuel, the priming lever is used to bleed air

from the fuel system.

Filler port (engine) Filler port for engine lube oil.

Filler port (marine gear) Filler port for marine gear lube oil.

Lube oil filter Filters fine metal fragments and carbon from the lube oil.

Filtered lube oil is distributed to the engine’s moving parts.

Cooling Water System Direct seawater cooling.

Seawater cooling The seawater pump feeds seawater. The flow is controlled automatically by a

thermostat which measures the temperature during operation.

Anticorrosion zinc The metal area of the seawater cooling system is prone to electrical corrosion.

The anticorrosion zinc is installed in the cylinder block and/or cylinder head to

prevent this. The anticorrosion zinc is itself reduced over time by electrical

corrosion, so it must be replaced at fixed intervals before it is completely

consumed in order to ensure that the metal area of the seawater cooling

system remains fully protected.

Intake air silencer This is the air intake silencer. The silencer guards against dirt in the air and

reduces the noise of air intake.

Name plate Name plates are provided on the engine and the marine gear and have the

model, serial number and other data.

Starter Starter motor for the engine. Powered by the battery.

Alternator Rotates by belt drive, generates electricity and charges the battery.

GM OPERATION.book 13 ページ２００４年１０月４日　月曜日　午前１１時１１分

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Keine Kommentare

Yanmar 1GM10V Spezifikationen Seite 13