Yanmar 1GM10V Spezifikationen PDF herunterladen (Seite 17)

3. Operation

17

3. OPERATION

3.1 Fuel Oil, and Lube Oil

3.1.1 Fuel Oil

When other than the specified

fuel oil is used, the engine will

not perform to full capacity and

parts may be damaged.

(1) Selection of Fuel Oil

Use diesel fuels for best engine

performance.

Cetane fuel number should be 45 or

greater.

(2) Handling of Fuel Oil

1)Water and dust in the fuel cause

engine failure. When fuel is stored, be

sure that the inside of the storage con-

tainer is clean, and that the fuel is

stored away from dirt or rain water.

2)Keep the fuel container stationery for

several hours to allow any dirt or

water to settle to the bottom. Use a

pump to extract the clear, filtered fuel

from the top of the container for use.

002550-00E

Use the clear filtered fuel from the upper

middle section of the container only, leaving any

contaminated fuel at the bottom.

002551-00E

(3) Fuel Tank (optional)

Be sure to attach a drain cock to the fuel

tank to enable dirt and water to settle at

the bottom of the tank to be drained off.

The fuel outlet should be positioned 20-

30mm above the bottom of the tank so

that only clean fuel is used.

(4) Fuel System

Install the fuel pipe from the fuel tank to

the fuel pump in accordance with the

diagram.

The oil/water separator (optional) is

placed at the centre section of the line.

ԛ

Ԛ

Ԙ

ԙ

Ԙ Sediment ԙԚ Drain cock ԛ To engine

002552-00E

Fuel system

Ԙ Fuel filter

ԙ Fuel feed pump

(priming lever)

Ԛ Oil/Water separator

ԛ Approx. 25 mm

Ԝ Within 500 mm

ԝ Drain cock

Ԟ Fuel cock

ԟ Fuel returm

Ԡ To fuel injection pump

ԡ Fuel tank

002553-00E

9

1

2

3

8

10

5

7

6

4

GM OPERATION.book 17 ページ２００４年１０月４日　月曜日　午前１１時１１分

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare