Yanmar ZT370 Spezifikationen PDF herunterladen (Seite 40)

MAINTENANCE

36 ZT370 Operation Manual

Perform the following procedures after the

first 50 hours of operation.

• Lubricating the engine coupler

• Changing the stern-drive oil

■ Lubricating the engine coupler

Lubricate the engine coupler every 50

hours if operated at idle for prolonged

periods of time.

Note: The stern-drive may be equipped

with a sealed engine coupler. The

sealed coupler and shaft splines can

be lubricated without removing the

stern-drive.

Apply approximately 8 to 10 pumps of

grease to the engine coupler grease fitting

(1, Figure 2) to lubricate the engine

coupler splines through the grease fittings,

if equipped. Use a typical hand-operated

grease gun to apply the grease.

Figure 2

Note: Lubricate the coupler on the ZT370

model every 50 hours if the vessel is

operated at idle for prolonged

periods of time.

■ Changing the stern-drive oil

See Changing the stern-drive oil on

page 41.

After Initial 50 Hours of

Operation

Description Where used

Multi-purpose heavy-duty type

lithium grease, NLGI #2

Coupler

039056-00X00

ZT370_OM.book 36 ページ２０１３年９月２７日　金曜日　午前１０時１６分

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 59 60

Aurelio 29 Oct 2024 | 18:29:11

Necesito manual de reparación completo por favor.

Yanmar ZT370 Spezifikationen Seite 40