Yanmar BY series Spezifikationen Seite 92

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 127
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 91
PERIODIC MAINTENANCE
BY Series Operation Manual 85
13.Approximately 10 minutes after
stopping the engine, remove the oil
dipstick and check the oil level. Add oil
if the level is too low.
Check Shift Cable Adjustment
See your authorized Yanmar dealer or
distributor.
Adjust Propeller Shaft
Alignment (If Equipped with
Marine Gear)
The flexible engine mounts are slightly
compressed during initial engine operation
and may cause misalignment between the
engine and the propeller shaft.
This adjustment requires specialized
knowledge and techniques. See your
authorized Yanmar dealer or distributor.
After you complete the initial 50 hour
maintenance procedures, perform the
following procedures every 50 hours
thereafter.
Check Seawater Filter (If Equipped)
and Inlet
Check the Air Intake Pipes
Check Battery Electrolyte Level
(Serviceable Batteries Only)
Check the Seawater Filter (If
Equipped) and Inlet
Refer to boat builder’s literature for
information on the seawater filter.
Check the Air Intake Pipes
Check the air intake system for damage or
wear. If necessary, consult your authorized
Yanmar dealer or distributor for repair.
Every 50 Hours of Operation
Seitenansicht 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 126 127

Kommentare zu diesen Handbüchern

Keine Kommentare