Yanmar BY series Spezifikationen PDF herunterladen (Seite 97)

PERIODIC MAINTENANCE

90 BY Series Operation Manual

Figure 5

3. Loosen inlet (Figure 5, (1)) and outlet

(Figure 5, (2)) hose clamps and

remove hoses from filter.

4. Remove bolts (Figure 5, (3)).

5. Remove mounting brackets and install

on new filter. Ensure fuel flow direction

is correct.

IMPORTANT

When replacing fuel filters, always

pre-fill them with fresh, clean fuel

to improve the system ability to be

bled.

6. Install on electrical bracket and tighten

screws securely.

7. Install hoses and tighten new clamps to

specification. See Hose Clamps on

page 114.

8. Connect battery negative (-) cable.

9. Bleed the fuel system and check for

leaks. See Bleeding the Fuel System

on page 41.

Replace Fuel Filter / Water

Separator Element

0003648

(1)

(2)

(3)

A DANGER

FIRE AND EXPLOSION

HAZARD!

• Diesel fuel is flammable and

explosive under certain

conditions.

• When you remove any fuel

system component to perform

maintenance (such as

changing the fuel filter) place

an approved container under

the opening to catch the fuel.

• NEVER use a shop rag to catch

the fuel. Vapors from the rag

are flammable and explosive.

• Wipe up any spills

immediately.

• Wear eye protection. The fuel

system is under pressure and

fuel could spray out when you

remove any fuel system

component.

• Failure to comply will result in

death or serious injury.

0000009en

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 126 127

Kommentare zu diesen Handbüchern

Keine Kommentare

Yanmar BY series Spezifikationen Seite 97

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Motor Yanmar BY series