Yanmar 1GM10V Spezifikationen PDF herunterladen (Seite 34)

NOTICE: If the engine stop knob is

released (pushed in) during the

cranking procedure, the engine will

start. NEVER start the engine in this

mode.

Recheck the Engine Oil

When the oil is distributed throughout the

internal components, start the engine and

run at no load for about 5 minutes. This will

ensure that all oil galleys, oil filters and oil

tubes are full of oil. Shut the engine down

and recheck the engine oil level. See

Checking the Engine Oil on page 24. Add oil

to the proper level, if necessary.

DAILY CHECKS

Before starting for the day, make sure the

Yanmar engine is in good operating

condition. CAUTION! It is important to

perform daily checks as listed in this

Operation Manual. Periodic

maintenance prevents unexpected

downtime, reduces the number of

accidents due to poor engine

performance and helps extend the life of

the engine. Make sure you check the

following items:

Visual Checks

1. Check for engine oil leaks.

2. Check for fuel leaks.WARNING! Avoid

skin contact with the high-pressure

diesel fuel spray caused by a fuel

system leak, such as a broken fuel

injection line. High-pressure fuel

can penetrate your skin and result

in serious injury. If you are exposed

to high-pressure fuel spray, obtain

prompt medical treatment. NEVER

check for a fuel leak with your

hands. ALWAYS use a piece of

wood or cardboard. Have your

authorized Yanmar Marine dealer or

distributor repair the damage.

3. Check for engine seawater leaks.

4. Check for damaged or missing parts.

5. Check for loose, missing or damaged

fasteners.

6. Check the electrical harnesses for

cracks, abrasions, and damaged or

corroded connectors.

7. Check hoses for cracks, abrasions, and

damaged, loose or corroded clamps.

BEFORE YOU OPERATE

28 GM Series Operation Manual

© 2007 Yanmar Marine International

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare